Commit 9dfe462a authored by Alexander Nikolas Breuer's avatar Alexander Nikolas Breuer
Browse files

Added 3d advection convergence setting.

parent 0bfef8e0
Convergence (advection equation, 3D)
====================================
This directory contains input and output for three-dimensional convergence runs using the advection equation.
In the fused simulations, shorter wave lengths are used with increasing id.
* Contact: Alex Breuer
Configs for the 3D Advection Convergence Setting
================================================
Used commands:
.. code-block:: bash
./gen_configs.js
<?xml version="1.0" encoding="UTF-8"?>
<!--
@file This file is part of EDGE.
@author Alexander Breuer (anbreuer AT ucsd.edu)
@section LICENSE
Copyright (c) 2021, Friedrich Schiller University Jena
Copyright (c) 2019, Alexander Breuer
Copyright (c) 2016-2018, Regents of the University of California
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
@section DESCRIPTION
Template for 3D advection convergence settings.
-->
<edge>
<cfr>
<mesh>
<in>
<base>{{i_meshBase}}</base>
<extension>{{i_meshExt}}</extension>
</in>
<boundary>
<periodic>106</periodic>
</boundary>
</mesh>
<setups>
<initial_values>
<![CDATA[
var k := 1;
var x_sca := 2 * PI * x / 10;
var y_sca := 2 * PI * y / 10;
var z_sca := 2 * PI * z / 10;
x_sca := x_sca * k;
y_sca := y_sca * k;
z_sca := z_sca * k;
q[0] := sin( x_sca ) * cos( y_sca) * sin( z_sca );
]]>
<![CDATA[
var k := 2;
var x_sca := 2 * PI * x / 10;
var y_sca := 2 * PI * y / 10;
var z_sca := 2 * PI * z / 10;
x_sca := x_sca * k;
y_sca := y_sca * k;
z_sca := z_sca * k;
q[0] := sin( x_sca ) * cos( y_sca) * sin( z_sca );
]]>
<![CDATA[
var k := 3;
var x_sca := 2 * PI * x / 10;
var y_sca := 2 * PI * y / 10;
var z_sca := 2 * PI * z / 10;
x_sca := x_sca * k;
y_sca := y_sca * k;
z_sca := z_sca * k;
q[0] := sin( x_sca ) * cos( y_sca) * sin( z_sca );
]]>
<![CDATA[
var k := 4;
var x_sca := 2 * PI * x / 10;
var y_sca := 2 * PI * y / 10;
var z_sca := 2 * PI * z / 10;
x_sca := x_sca * k;
y_sca := y_sca * k;
z_sca := z_sca * k;
q[0] := sin( x_sca ) * cos( y_sca) * sin( z_sca );
]]>
<![CDATA[
var k := 5;
var x_sca := 2 * PI * x / 10;
var y_sca := 2 * PI * y / 10;
var z_sca := 2 * PI * z / 10;
x_sca := x_sca * k;
y_sca := y_sca * k;
z_sca := z_sca * k;
q[0] := sin( x_sca ) * cos( y_sca) * sin( z_sca );
]]>
<![CDATA[
var k := 6;
var x_sca := 2 * PI * x / 10;
var y_sca := 2 * PI * y / 10;
var z_sca := 2 * PI * z / 10;
x_sca := x_sca * k;
y_sca := y_sca * k;
z_sca := z_sca * k;
q[0] := sin( x_sca ) * cos( y_sca) * sin( z_sca );
]]>
<![CDATA[
var k := 7;
var x_sca := 2 * PI * x / 10;
var y_sca := 2 * PI * y / 10;
var z_sca := 2 * PI * z / 10;
x_sca := x_sca * k;
y_sca := y_sca * k;
z_sca := z_sca * k;
q[0] := sin( x_sca ) * cos( y_sca) * sin( z_sca );
]]>
<![CDATA[
var k := 8;
var x_sca := 2 * PI * x / 10;
var y_sca := 2 * PI * y / 10;
var z_sca := 2 * PI * z / 10;
x_sca := x_sca * k;
y_sca := y_sca * k;
z_sca := z_sca * k;
q[0] := sin( x_sca ) * cos( y_sca) * sin( z_sca );
]]>
</initial_values>
<end_time>20</end_time>
</setups>
<output>
<error_norms>
<reference_values>
<![CDATA[
var k := 1;
var x_sca := 2 * PI * x / 10;
var y_sca := 2 * PI * y / 10;
var z_sca := 2 * PI * z / 10;
x_sca := x_sca * k;
y_sca := y_sca * k;
z_sca := z_sca * k;
q[0] := sin( x_sca ) * cos( y_sca) * sin( z_sca );
]]>
<![CDATA[
var k := 2;
var x_sca := 2 * PI * x / 10;
var y_sca := 2 * PI * y / 10;
var z_sca := 2 * PI * z / 10;
x_sca := x_sca * k;
y_sca := y_sca * k;
z_sca := z_sca * k;
q[0] := sin( x_sca ) * cos( y_sca) * sin( z_sca );
]]>
<![CDATA[
var k := 3;
var x_sca := 2 * PI * x / 10;
var y_sca := 2 * PI * y / 10;
var z_sca := 2 * PI * z / 10;
x_sca := x_sca * k;
y_sca := y_sca * k;
z_sca := z_sca * k;
q[0] := sin( x_sca ) * cos( y_sca) * sin( z_sca );
]]>
<![CDATA[
var k := 4;
var x_sca := 2 * PI * x / 10;
var y_sca := 2 * PI * y / 10;
var z_sca := 2 * PI * z / 10;
x_sca := x_sca * k;
y_sca := y_sca * k;
z_sca := z_sca * k;
q[0] := sin( x_sca ) * cos( y_sca) * sin( z_sca );
]]>
<![CDATA[
var k := 5;
var x_sca := 2 * PI * x / 10;
var y_sca := 2 * PI * y / 10;
var z_sca := 2 * PI * z / 10;
x_sca := x_sca * k;
y_sca := y_sca * k;
z_sca := z_sca * k;
q[0] := sin( x_sca ) * cos( y_sca) * sin( z_sca );
]]>
<![CDATA[
var k := 6;
var x_sca := 2 * PI * x / 10;
var y_sca := 2 * PI * y / 10;
var z_sca := 2 * PI * z / 10;
x_sca := x_sca * k;
y_sca := y_sca * k;
z_sca := z_sca * k;
q[0] := sin( x_sca ) * cos( y_sca) * sin( z_sca );
]]>
<![CDATA[
var k := 7;
var x_sca := 2 * PI * x / 10;
var y_sca := 2 * PI * y / 10;
var z_sca := 2 * PI * z / 10;
x_sca := x_sca * k;
y_sca := y_sca * k;
z_sca := z_sca * k;
q[0] := sin( x_sca ) * cos( y_sca) * sin( z_sca );
]]>
<![CDATA[
var k := 8;
var x_sca := 2 * PI * x / 10;
var y_sca := 2 * PI * y / 10;
var z_sca := 2 * PI * z / 10;
x_sca := x_sca * k;
y_sca := y_sca * k;
z_sca := z_sca * k;
q[0] := sin( x_sca ) * cos( y_sca) * sin( z_sca );
]]>
</reference_values>
<type>sout_file</type>
<file>{{i_errorXml}}</file>
</error_norms>
</output>
</cfr>
</edge>
#!/usr/bin/env node
/**
* @file This file is part of EDGE.
*
* @author Alexander Breuer (breuer AT mytum.de)
*
* @section LICENSE
* Copyright (c) 2021, Friedrich Schiller University Jena
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* @section DESCRIPTION
* Generates the gmsh- and EDGE-V configs.
**/
'use strict';
var nunjucks = require('nunjucks');
var l_fs = require('fs-extra');
const { exit } = require('process');
for( var l_ty of ['hex8r', 'tet4'] ) {
for( var l_ts of ['lts', 'gts'] ) {
for( var l_cl of [2, 1.25, 1, 0.625, 0.5, 0.4, 0.3125, 0.25, 0.2, 0.1] ) {
if( l_ts == 'lts' && l_ty != 'tet4' ) {
continue;
}
for( var l_pa of ['1', '8'] ) {
for( var l_ro of ['0', '1' ] ) {
var l_id = l_ty + '_' + l_ts + '_cl_' + l_cl + '_pa_' + l_pa;
if( l_ro == 1 ) {
if( l_pa == '1' ) {
continue;
}
l_id = l_id + '_reorder_only';
}
console.log( 'generating EDGE config for char length / element_type / ts / #parts / reorder only:', l_cl, '/', l_ty, '/', l_ts, '/', l_pa, '/', l_ro )
var l_meshBase = 'meshes/gen/edge_v/' + l_id;
var l_meshExt = '.msh';
var l_config = 'gen/' + l_id + '.xml';
l_fs.outputFile(
l_config,
nunjucks.render(
'config.njk', {
i_meshBase: l_meshBase,
i_meshExt: l_meshExt,
i_waveField: 'wave_field/' + l_id + '/wf',
i_receivers: 'receivers/' + l_id,
i_errorXml: 'errors/' + l_id + '.xml'
}
),
function(l_err) {
if(l_err) return console.log( l_err );
}
)
}
}
}
}
}
console.log( 'done' )
Meshes for the 3D Advection Convergence Settings
================================================
The "reorder_only" GTS-versions of the tet4-meshes went through the same reordering as the parallel versions but only have a single partition.
Used commands:
.. code-block:: bash
./generate.sh
<?xml version="1.0" encoding="UTF-8"?>
<!--
@file This file is part of EDGE.
@author Alexander Breuer (breuer AT mytum.de)
@section LICENSE
Copyright (c) 2021, Friedrich Schiller University Jena
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
@section DESCRIPTION
EDGE-V config.
-->
<edge_v>
<mesh>
<periodic>106</periodic>
<reorder_only>{{i_reorderOnly}}</reorder_only>
{%- if i_nParts > 1 %}
<n_partitions>{{i_nParts}}</n_partitions>
{%- endif %}
<write_element_annotations>1</write_element_annotations>
<files>
<in>{{i_meshIn}}</in>
<out>
<base>{{i_meshOut}}</base>
<extension>.msh</extension>
</out>
</files>
</mesh>
<time>
<n_groups>{{i_nTimeGroups}}</n_groups>
{%- if i_nParts == 1 %}
<files>
<out_time_steps>{{i_statsOut}}</out_time_steps>
</files>
{%- endif %}
</time>
</edge_v>
#!/usr/bin/env node
/**
* @file This file is part of EDGE.
*
* @author Alexander Breuer (breuer AT mytum.de)
*
* @section LICENSE
* Copyright (c) 2021, Friedrich Schiller University Jena
* Copyright (c) 2019, Alexander Breuer
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* @section DESCRIPTION
* Generates the gmsh- and EDGE-V configs.
**/
'use strict';
var nunjucks = require('nunjucks');
var l_fs = require('fs-extra');
const { exit } = require('process');
for( var l_ty of ['hex8r', 'tet4'] ) {
for( var l_ts of ['lts', 'gts'] ) {
for( var l_cl of [2, 1.25, 1, 0.625, 0.5, 0.4, 0.3125, 0.25, 0.2, 0.1] ) {
if( l_ts == 'lts' && l_ty != 'tet4' ) {
continue;
}
console.log( 'generating gmsh config for char length / element_type / ts:', l_cl, '/', l_ty, '/', l_ts )
l_fs.outputFile(
'gen/configs/gmsh/' + l_ty + '_' + l_ts + '_' + l_cl + '.geo',
nunjucks.render(
l_ty+'.njk', {
i_cl: l_cl,
i_lts: (l_ts == 'lts')
}
),
function(l_err) {
if(l_err) return console.log( l_err );
}
)
for( var l_pa of ['1', '8'] ) {
for( var l_ro of ['0', '1' ] ) {
var l_id = l_ty + '_' + l_ts + '_cl_' + l_cl + '_pa_' + l_pa;
if( l_ro == 1 ) {
if( l_pa == '1' ) {
continue;
}
l_id = l_id + '_reorder_only';
}
console.log( 'generating EDGE-V config for char length / element_type / ts / #parts / reorder only:', l_cl, '/', l_ty, '/', l_ts, '/', l_pa, '/', l_ro )
var l_configOut = 'gen/configs/edge_v/' + l_id + '.xml';
var l_nTimeGroups = 1;
if( l_ts == 'lts' ) {
l_nTimeGroups = 5;
}
var l_meshOut = 'gen/edge_v/' + l_id;
var l_statsOut = 'gen/stats/edge_v_' + l_id + '.csv';
l_fs.outputFile(
l_configOut,
nunjucks.render(
'edge_v.njk', {
i_meshIn: 'gen/gmsh/' + l_ty + '_' + l_ts + '_' + l_cl + '.msh',
i_nParts: l_pa,
i_nTimeGroups: l_nTimeGroups,
i_reorderOnly: l_ro,
i_meshOut: l_meshOut,
i_statsOut: l_statsOut,
}
),
function(l_err) {
if(l_err) return console.log( l_err );
}
)
}
}
}
}
}
console.log( 'done' )
#!/bin/bash
##
# @file This file is part of EDGE.
#
# @author Alexander Breuer (breuer AT mytum.de)
#
# @section LICENSE
# Copyright (c) 2021, Friedrich Schiller University Jena
# Copyright (c) 2019, Alexander Breuer
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
#
# 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
#
# 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
#
# 3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# @section DESCRIPTION
# Generates the meshes.
##
echo "hostname: $(hostname)"
echo "gmsh-version:"
gmsh --version
rm -r gen 2> /dev/null
mkdir -p gen/gmsh gen/edge_v gen/logs/gmsh gen/logs/edge_v
./gen_configs.js
for l_cl in 2 1.25 1 0.625 0.5 0.4 0.3125 0.25 0.2 0.1
do
for l_ty in hex8r tet4
do
for l_ts in gts lts
do
if [[ ${l_ty} == 'hex8r' && ${l_ts} == 'lts' ]]
then
continue
fi
echo "$(date) running gmsh char length ${l_cl} for type ${l_ty}_${l_ts}"
gmsh -3 -format msh2 gen/configs/gmsh/${l_ty}_${l_ts}_${l_cl}.geo -o gen/gmsh/${l_ty}_${l_ts}_${l_cl}.msh 2>&1 > gen/logs/gmsh/${l_ty}_${l_ts}_cl_${l_cl}_gmsh.log 2>&1
for l_pa in 1 8
do
echo "$(date) running EDGE-V for char length ${l_cl} for nParts ${l_pa}"
edge_v -x gen/configs/edge_v/${l_ty}_${l_ts}_cl_${l_cl}_pa_${l_pa}.xml > gen/logs/edge_v/${l_ty}_${l_ts}_cl_${l_cl}_pa_${l_pa}_edge_v.log 2>&1
if [[ l_pa -gt 1 && ${l_ts} == 'gts' ]]
then
echo "$(date) running EDGE-V for char length ${l_cl} for nParts ${l_pa} (reorder only)"
edge_v -x gen/configs/edge_v/${l_ty}_${l_ts}_cl_${l_cl}_pa_${l_pa}_reorder_only.xml > gen/logs/edge_v/${l_ty}_${l_ts}_cl_${l_cl}_pa_${l_pa}_reorder_only_edge_v.log 2>&1
fi
done
done
done
done
/**
* @file This file is part of EDGE.
*
* @author Alexander Breuer (alex.breuer AT uni-jena.de)
*
* @section LICENSE
* Copyright (c) 2021, Friedrich Schiller University Jena
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* @section DESCRIPTION
* Template for a hex8r-mesh.
**/
cl={{i_cl}};
Include "../../../hex8r_base.geo";
/**
* @file This file is part of EDGE.
*
* @author Alexander Breuer (alex.breuer AT uni-jena.de)
*
* @section LICENSE
* Copyright (c) 2021, Friedrich Schiller University Jena
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.